[FATnLOW]

Body back on the frame, now body work on the front fenders .....

[vette59jdwl]

FATnLOW What type of front end is that  If i ever was going to put a front end in the 32 It would be one like that  please let me know make and model  thanks  vette59jdwl

[FATnLOW]

Vette.....  Front end is Heitdt's Super Ride  BX-114  For 1934-1936 Chevy Master

[vette59jdwl]

I would need it to fit the original 32 chevy frame  will get in touch with them in the morning  thanks very much   vette59jdwl. I do have a 65 corvair front end complete but a good friend wants it real bad  and i think it would look to heavy in the 32 roadster

[themoose]

I use one from Kugel. They have one for the 32 Chevy and it fit great. I didn't want to get rid of the stock front cross member so I notched it in the center and install the front end square tube in the opening and welded it all the way across and up the sides of the frame so it became an integral part of the cross member/frame. It's never gonna fall out . Here's a link..Give them a call and talk to Jeff the owner.

http://www.kugelkomponents.com/front_suspension/frontsuspension.php

[madmike3434]

I would need it to fit the original 32 chevy frame  will get in touch with them in the morning  thanks very much   vette59jdwl. I do have a 65 corvair front end complete but a good friend wants it real bad  and i think it would look to heavy in the 32 roadster

WAYNE...just cruising ebay usa this morning and a pair of nice rear fenders for 29--32 chevy were listed for sale last nite.

mike

[vette59jdwl]

Mike 32 is 32 only unless it is 33 truck  i will take a look  thanks   vette59jdwl

[vette59jdwl]

MadMike3434    The one on the right is a 1931 chevy rear fender the one on the left is not the same and is not a 32 but is a 1930 chev rear fender vette59jdwl  thanks

[madmike3434]

when I saw the ad I thought of your needs.

Am on ebay every day and sometimes go to the 32 section to see if any 34-35 parts misidentified.

mike

[vette59jdwl]

   MIKE     I have no idea who these turkeys are that put up things on e bay I can not believe some of the adds like fits chevrolet pontiac ford must have also fits Rolls Royce what a$$holes.It either fits a 33 or 35 or whatever but it doesn't fit everything most these clowns sound like they are from slabovia
 vette59jdwl  thanks mike

  I had a set of 31 chevrolet rear fenders that were in perfect shape so i put them on the 32 for now
I also have a 31 trunk that is going on the 32 till i find the proper rumble seat lid.

   I can live with it  It is my 32 chevy deluxe roadster 6 cylinder 230 =5 speed with Dodge D-50 rear end ( Bits & Pieces

[madmike3434]

People who list,  lets say a fender ,  have no idea exactly what it fits and by putting in multiple makes , are hoping somebody who is looking for rear fender for a whatever, that these fit their car, because the actual owner knows what they look like.

How many times have you had a part and could not identify it.  ??

They are not a$$holes from lower slobovia or middle slobovia or upper slobovia either, they do not know and are using a SPAM system by using multiple makes.     If you wish you can complain directly to ebay about the spamming.

mike........

[vette59jdwl]

Mike if i had a part that i didn't know what it was i would GOOGLE it or asked someone for advice and their knowledge on the article before i posted something i din't have a clue about,because that would make an a$$hole out of moi  vette59jdwl

[madmike3434]

I have people ask me all the time, do you know what this fits   Sometimes its easy sometimes its impossible because its outside my interest zone.  I know 33--35 Chevrolets and not much about 31 and before and 36 and above.

Why ??  Because I have no interest in them.

Wayne here is a little test for you or anybody else..........
3---who makes the 16 valve valve covers that are 2 piece.
2---who makes the flagged tall & wide 2 piece covers
1---what motor do these valve covers fit

mike

[sammons]

FATnLOW i'd guess you had some of your energy back!   I hadn't seen my buddy Tom since monday, he said he had a cold that was kicking his ass.lol looking good man!

Moose,  I really like the way you retained your crossmember.

Mike i'd say they look like they fit sbc, (as they appear to be similar to the big two piece ones that my friend give me). I don't know who makes them though. I really like the finned ones with the crossflags.
I found a similar Moroso set on ebay, yikes,  $1000.

[madmike3434]

Mike i'd say they look like they fit sbc, (as they appear to be similar to the big two piece ones that my friend give me). I don't know who makes them though. I really like the finned ones with the crossflags.
I found a similar Moroso set on ebay, yikes,  $1000.

They are LARSON ENGINEERING, first ones had the cross flags opening cast into the tops.  They were made for SBC and BBC.   Common are the sbc ones, hard to get is the BBC ones as they made only less than 50 pair I read somewhere. They were produced also by Moroso as induction engineering.

Total performance in Conn also sold them when they were repo'd by  D J BRANSON in fla.  Since then he sold the tooling and casting molds to a guy in ark or arz who has done nothing with them .  Also available for these was an air cleaner for holley or afb single or 2 x 4.  Looked like side draft webers.

Now that the one set, who has the answer to the other set of black 16V ones.?

mike