Welcome to Rusty Bowtie. Please login or sign up.

Shoutbox


Recent

Members
Stats
  • Total Posts: 29,552
  • Total Topics: 3,001
  • Online today: 84
  • Online ever: 5,574 (May 14, 2026, 07:15:04 PM)
Users Online
  • Users: 0
  • Guests: 42
  • Total: 42
42 Guests, 0 Users

Late '40s early "50s Chevy Pickup brake mix and match?

Started by sixball, April 08, 2016, 07:21:01 PM

Previous topic - Next topic

sixball

 Does any one know if the '48- '49 or so pickup front drums can be used with '53 or so better brakes? Those drums fit my spoke wheels but I like the later brakes. I think bearing and spindles are the same and shoes are 2"X 11" but I don't know about the offset on the backing plate.



The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop.  Edwin Conklin

woodremover

I am using a 50 front axle in my 34 pick up . 50 was the first year for bendix style brakes ,
all earlier trucks used the huck style brake , I have both style drums here and the bendix style installed on the truck already
I have a flat tire on the front that needs repaired , I wll take it apart this week and send some comparison photo's
I am curious to find out now , I am going to run the 6 bolt 15 inch artillery wheels ,but knowing if I could do a drum swap
maybe run the wires once and awhile !!  the drums are deffenetly different though
joe mac

sixball

Thank you. I uses I can do that too. I have the Bendix brakes on my '53 pickup and the Huck brakes on the axle I want to use on the roadster. It seems there is a difference in how the outer edge of the drum fits the backing plate. I do know that the Bendix drums are the same front and rear and that my '70 Blazer uses the same drums as my '53.
The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop.  Edwin Conklin