Welcome to Rusty Bowtie. Please login or sign up.

Shoutbox


Recent

Members
Stats
  • Total Posts: 29,552
  • Total Topics: 3,001
  • Online today: 84
  • Online ever: 5,574 (May 14, 2026, 07:15:04 PM)
Users Online
  • Users: 0
  • Guests: 13
  • Total: 13
13 Guests, 0 Users

Why Is Sheet Metal Measured By Gauge Instead Of Inches?

Started by EDNY, October 24, 2023, 06:27:51 AM

Previous topic - Next topic

Essex_29

#1
Thank you, Ed, for the info. For me, being from Europe, I haven't had any idea about
where the gauge thing stems from, and just accepted it as a fact, like the fact that
you use thousands of an inch, gallons and cubic feet instead of millimeters, liters and
cubic meters.
Also threads per inch, instead of our system of measuring the width of one thread in millimeters.
I like to use both ways to measure things, since I've worked on US made cars since my teens,
and also built radio controlled air planes to Brittish plans, all measures being imperial. For some
reason Brittish cars have their engine sizes in liters but fuel tanks in gallons. Also all model
engines, maybe except for Rusdian made ones, have the displacements given in hundredths of a
cubic inch. My biggest engine is a "100", which translates to 16cc  or one cubic inch. And it's made
in Japan. Go figure.

TFoch

Interesting info.  My Dad was a "tin knocker" starting with duct work and eventually working his way up to being one of the best guys for copper work in the state.  He always talked gauge when talking thickness.  I worked for Raytheon in the fabrication shop making parts for marine radar and missiles.  We always used thickness (.060, .090, .125) when we were talking about material.  I guess it comes down to if you're making duct work or missiles.  ;D
Spending time with my grandkids gets in the way of finishing my car but I don't regret it!

sixball

The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop.  Edwin Conklin