Rattiac, glad you can speed up now. Side wind will always suck on that sedan (like a big side sail
) There are many options I sure, some use bar and some use a torsion set up. Then check to see if you have room to mount in front or behind axel. I usually measure how wide I need from an outter mount point and hit the salvage yard/or buddys junk car pile
I usually build a stout bracket to mount off the lower shock hole (or lower A-arm on independent). If you haven't plated your front frame you can just bolt center bushing mounts to the bottom. If open I always weld nuts inside just incase I want to plate it later.
I don't know how wide or the reach you need on yours (or if there is a kit availible), but for a reference: C2-C3 Vette front bar measures 37.5" center of end bolt hole to bolt hole. Reach is (from bolt center of hole) to front of bar, 6 1/4". If you are hunting used, stay away from the big HD performance or heavy cars. They would be a bit to stiff for your lighter 32. Good luck!