[Essex_29]

Whew! Almost midnight. I spent the whole day in the garage
and got the right hand side rear fender almost entirely done.
 Also the front fender is good under way, so with any luck I?ll
have two fenders done by the end of the weekend.
Note to self: No fenders on my next build!

[sammons]

Dang Essex, your on a roll. Looks good!

Note to self 😁   When i was starting my coupe, the four 34-35s i had bits and pieces from, none had fenders or running boards so it wasn't an option for me. With a coupe... they look fine with out them. Sedans i really prefer fenders. You can spend as much or more time ironing out the dents etc on them than the whole rest of the car.

Keep a roll'n on, just don't get over worked and burnt out. Your getting close👍

[TFoch]

Progress!  Nice work!

[sixball]

Your work is too good. Everyone will think it all came that way.

[Essex_29]

Thank you all for the positice comments!
It feels endless. I've been at it litterally every day. Today I was applying filler and sanding,
filler and sanding, filler and sanding and I distinctly felt that nothing improved.
The right hand side fenders are both done, but the driver's side ones simply won't comply.
The front fender is in bad shape, so I guess I should have expected it.
With some luck I'll be done with the mud work on the fenders this coming weekend, after 
that I'll spray epoxy and 3M rocker guard on the insides of the fenders, I have six cans
standing by. I use epoxy as a sanding sealer too, it's a bit hard to sand, but it's already
in my garage, I buy industrial epoxy in 2-1/2 gallon batches, that includes both epoxy
and hardener.

sixball, that's how it works. The more work you put in, the less it shows.