[62131]

I'm far enough along thought I would start a build thread and let you all see where I started and where I'm at after 22 months of working a few hours a week and some weekends. These are pictures of what my car looked like when I bought it. The guy I got it from did a lot of work replacing most of the wood with steel. He had already did the structure and floor pan and made metal interior panel out of steel.

[62131]

Here's a few more.

[62131]

Here's some pictures of the interior panels he made.

[62131]

As you can see the car was pretty rotten around the bottom. I have replaced all those panels with new panels. Removed and discarded the 305 engine that he had in it, Keep the th350 transmission and had it rebuilt.

[62131]

Here is frame after I removed the body and the IFS he had put in. I must say it was a mess. I looked for a replacement frame but didn't have any luck finding one close enough to go get.

[62131]

Here are a few pictures me putting in my MII cross member and boxing the frame.

[62131]

Here it is almost ready for paint.

[62131]

I coated the frame with two coats of rust bullet and two coats of black top coat.

[62131]

I set the engine and transmission in and put in my tubular cross member.

[62131]

Putting the body back on the frame.

[FATnLOW]

Looking good...A lot of  work but it will pay off at the end....Keep photos coming

[TFoch]

Nice work!  Glad to see you started this thread.  Looking forward to watching the progress.
Tom

[RCstang]

Rock on man.  Nice work

[chopper526]

Very nice, I like they way you put the front suspension in.

[ghost28]

It is looking real good. Is the booster a single or dual  it looks like it belongs there.I am gonna do my buick the same way.