Rusty Bowtie
Classified - PARTS For Sale - Wanted => 1930's Chevy/GM PARTS Wanted/For Sale => Topic started by: EDNY on December 30, 2012, 09:42:18 PM
-
Wanted: 1934 Chevy Master frame without front or rear suspension ie framed rails. (Planning on boxing, installing a Mustang II and four link)
Prefer one close to the "very upstate New York" area.
-
Progressive Automotive has frame rails with the cross members installed. See below
Builder Frames
Our frames are produced from 10 gauge steel and double welded for superior strength. Full length boxing plates and our tubular X-member is installed. The X-member is designed to accommodate all short tail shaft G.M. transmissions, including the overdrive models. Front radiator mounts, body mounts, running board brace holes and vulcanized G.M. transmission mounts are provided..... CC2..............$3,940.00
http://www.progressiveautomotive.com
-
Thanks Tom...looking for a stock one so I can just put it away until I need it. My 34 Master is a 1980's build, IE stick welded, not mig'd. Nothing wrong with it, but it even has an OEM Mustang II front end welded in!
I'd like to have one to set up at my convenience...then just swap the entire body/chassis instead of taking the 34 apart and having parts all over the place in various stages of completion.
Located a nice one in Canada for $200....but it's a long way up north! Still might take a run up there in Spring.
-
Just giving myself a BUMP in case someone trolls the forum..
-
Saw another 33 frame on Ebay for cheap. I'll keep looking for a 34.
-
Here's another way out west again...
http://www.ebay.com/itm/1934-Chevy-Body-Shell-Frame-/181514070504?pt=Salvage_Parts_Cars&hash=item2a4314e9e8&vxp=mtr
-
Ed I think i have solved your problem get in touch with of me off line at lave@cogeco.ca. Wayne
-
i just sold my 34 frame from a think a master model with my 32 body.buyer had no intention on using it and planned on selling it. hes in ri on mass border.
frame was excellent and still had the factory date stamp visable on frame rail.originally came with the dubonnet independent suspension.i could get his info
-
i just sold my 34 frame from a think a master model with my 32 body.buyer had no intention on using it and planned on selling it. hes in ri on mass border.
frame was excellent and still had the factory date stamp visable on frame rail.originally came with the dubonnet independent suspension.i could get his info
That would be great..I'm only a 4-5 hrs from there.
-
Ed,
If you need help getting it let me know. It's not too far from me.
Tom
-
Ed,
If you need help getting it let me know. It's not too far from me.
Tom
Thanks Tom..
-
i sent him a message.its available.i have a picture of it.is it what your looking for?
-
i sent him a message.its available.i have a picture of it.is it what your looking for?
Looks like my 34....just need to determine if it's a 34 Master for sure. Got your PM with contact info.
Ed
-
i sent him a message.its available.i have a picture of it.is it what your looking for?
redsshed77
Thanks for the info..just called him....let me just say he wants a lot for it. Could buy a new boxed frame for a few hundred dollars more to give you an idea.
I know of one way up in Canada that I need to get serious about.
-
viewing pictures of that frame, I would say YES its definitely a 34 master.
I would say a good solid complete not rusted thru frame like this would be $300---500 range .
They built a lot of 1934 Chevrolet masters and frames should not be scarce.
The guy can ask whatever he wants, cannot eat RIDICULOUS ASKING PRICE.
The frame is missing the rear riveted to the frame, " gas tank cover support brackets" that are about 6==10 inches from the end.
MIKE============ 8)
-
viewing pictures of that frame, I would say YES its definitely a 34 master.
I would say a good solid complete not rusted thru frame like this would be $300---500 range .
They built a lot of 1934 Chevrolet masters and frames should not be scarce.
The guy can ask whatever he wants, cannot eat RIDICULOUS ASKING PRICE.
The frame is missing the rear riveted to the frame, " gas tank cover support brackets" that are about 6==10 inches from the end.
MIKE============ 8)
I agree with you...for what he is asking I could buy 4 or 5 of them.
-
Sounds like a road trip up into Canada :)
-
Lots of people seem to think they are sitting on a goldmine. Reality finally sets in at some point in time and they realize the opportunity to sell their piece of rusty metal for a ridiculous price has passed.-
They usually get forced to sell when they are financially unable to pay their debts.
looks good on them.
mike 8)