Rusty Bowtie
General Category => General Discussion - Intros => Topic started by: EDNY on September 16, 2022, 01:36:53 PM
-
An old article....needed info related to over the axle fab...
https://www.motortrend.com/how-to/diy-exhaust-system-custom-done-at-home/
-
I made mine at home all out of J and U bend tubing (2.25" diameter).
-
Tom
That's what I want to do with my 33,,,have any part/kit numbers?
Ed
-
Ed,
No kit. I did a layout and fabricated it all from scratch. The trick is to get the right bend radius to get over the rear axle and have the clearance you need. I can go back and look at what worked for me to help you out. I have rear leaf springs which gave me more room than a four link or triangulated four link would have.
Tom
-
Thanks Tom..don't worry about it right now. I need to get my four post ceiling opened first...so I can actually work on the exhaust.
-
Pretty sure I bought a kit from Speedway or JEGS, had a bunch of U's and angles, you have to cut and weld them to fit your application. The kit came in various diameters.
-
I used one of the kits from Speedway when I built mine. I didn't need it all to do the job but like anything else I've used it all up on various projects over the years...Here's a link to take a look at.
https://www.speedwaymotors.com/Search?query=exhaust%20bend%20kit (https://www.speedwaymotors.com/Search?query=exhaust%20bend%20kit)
-
Thanks Guys!