Print Page - My 33 3 window

Title: My 33 3 window
Post by: woodremover on February 02, 2013, 11:24:32 PM

Just started hot rodding my 33 3 window.Plans are a 2 inch chop and a 425 buick nailhead turbo 400 and a 9 inch ford rear.It will also be full fendered and is an original rumble seat car

Title: Re: My 33 3 window
Post by: themoose on February 03, 2013, 07:11:17 AM

Looks like your off to a great start. I've have always has a preference for full fendered cars. Keep the pics coming!!

Moose

Title: Re: My 33 3 window
Post by: TFoch on February 03, 2013, 07:57:06 AM

Looks like it's a pretty solid body. Good luck with your project and keep us updated.
Tom

Title: Re: My 33 3 window
Post by: EDNY on February 03, 2013, 11:18:07 AM

Great steel to start with! Here are the links Moose posted related to "1933-34 Chevy Coupe - Choppin' A Chevy"

http://www.streetrodderweb.com/tech/0709sr_1933_chevy_coupe/viewall.html

http://www.streetrodderweb.com/tech/0710sr_choppin_a_chevy/

Very helpful...take special note on chopping the rear window.

Ed

Title: Re: My 33 3 window
Post by: woodremover on February 03, 2013, 11:57:06 AM

That is a great write up for the chop! would never had guessed the steel was as good as it is when I purchased the car.

Title: Re: My 33 3 window
Post by: EDNY on February 03, 2013, 12:09:06 PM

How did you remove the paint?

I need to do that shortly ???

Title: Re: My 33 3 window
Post by: woodremover on February 03, 2013, 12:22:05 PM

I removed all the paint by hand with a single sided razor blade and holder and some paint remover disk's that go in a drill .Took a day to strip the car as in the photo's will post a photo later of the paint and rust removing wheels later joe mac

Title: Re: My 33 3 window
Post by: EDNY on February 03, 2013, 12:54:06 PM

A day to strip the car? Wow Guess you don't work for the government!

Title: Re: My 33 3 window
Post by: ghost28 on February 03, 2013, 02:50:41 PM

Hey woodremover I know ya from the HAMB your pictures gave you away. Welcome to the site and your projects are coming right along. Keep us informed.
John

Title: Re: My 33 3 window
Post by: woodremover on February 03, 2013, 03:29:05 PM

Hey John
Dont post to much on the hamb lately,although I have bought a few things over there.Still there lurking though. Joe Mac

Title: Re: My 33 3 window
Post by: woodremover on February 03, 2013, 03:32:34 PM

Hey Ed
Here is my paint removal kit .I guess it dont matter where what country you live in the goverment and it's employee's are all the same.Cash grabbing and do nothing.Joe Mac

Title: Re: My 33 3 window
Post by: EDNY on February 03, 2013, 05:23:59 PM

Quote from: woodremover on February 03, 2013, 03:32:34 PM
Hey Ed
Here is my paint removal kit .I guess it dont matter where what country you live in the goverment and it's employee's are all the same.Cash grabbing and do nothing.Joe Mac

Damn...wish you were closer and my Uncle..I'd buy you case of American Beer :-X and ask you to do mine! I retired with 33 years in the federal govt and saw a bunch of pampered employees... BUT then again some really hard working ones also!

Ed

Title: Re: My 33 3 window
Post by: TFoch on February 26, 2013, 09:04:25 PM

Joe,
I never tried one of those wheels. I'll have to give it a try next time. Do you use a specific brand or just some generic ones?
Tom

Title: Re: My 33 3 window
Post by: EDNY on February 26, 2013, 09:55:06 PM

Tom

I just bought a couple "3M SandBlaster 9681 4-1/2-Inch Coarse Clean-N-Strip Discs" and the required quick change disc holder. Need to remove the original paint on my 33....will let you know how they work.

Ed

Rusty Bowtie

General Category => Early Chevy/GM Discussion => Topic started by: woodremover on February 02, 2013, 11:24:32 PM