Author Topic: Wood Header  (Read 62 times)

FATnLOW

  • Master Deluxe
  • *****
  • Posts: 829
  • Location: Ft.Smith Ar
Wood Header
« on: July 09, 2018, 04:30:17 PM »
Any one have the wood header above the windshield for a '33-34 or know where I can get one?needing one ..or a part of one , for a sample to make one
« Last Edit: July 09, 2018, 07:54:04 PM by FATnLOW »

madmike3434

  • Master Deluxe
  • *****
  • Posts: 785
  • Location: whitby ontario Canada
Re: Wood Header
« Reply #1 on: July 09, 2018, 09:22:12 PM »
I take it that your looking for one from a master series, as the standard would be different.

Problem with wood repo guys is that they are so busy they are behind by a year, so trying to borrow one really is the best tact to take.  Unfortunately I cannot help you myself.

Up there where you say wood header.......I think there are two.
#1 is part of the roof system and is joined to the other 3 parts surrounding the roof opening.
#2 is the part that goes across just above the windshield area.  This is flat and easily reproduced.

I will search my pictures and see if I have anything to post as a reference.

mike lynch

FATnLOW

  • Master Deluxe
  • *****
  • Posts: 829
  • Location: Ft.Smith Ar
Re: Wood Header
« Reply #2 on: July 09, 2018, 09:33:17 PM »
post some photos if you locate some.....Yes the one above the windshield i understand  consists of 3 pieces  1 long and the curved piece at the ends..... I got a response  that Classic Wood Products makes this piece...I  will call classic wood products  in the morning..
« Last Edit: July 09, 2018, 09:36:03 PM by FATnLOW »

madmike3434

  • Master Deluxe
  • *****
  • Posts: 785
  • Location: whitby ontario Canada
Re: Wood Header
« Reply #3 on: July 09, 2018, 09:37:14 PM »
I found these 2 in my pictures files, it might be your car ?

Think the 33 belongs to JOE wood guy in Toronto area

pictures are of a 33 master 4 door

Be aware with the various wood guys, IF THEY DO NOT HAVE IT IN STOCK, back away ,  otherwise your going to be running around in a circle waiting to get it.
mike
« Last Edit: July 10, 2018, 01:47:16 PM by madmike3434 »

sammons

  • Master Deluxe
  • *****
  • Posts: 1546
  • Age: 57
  • Location: sw kansas
Re: Wood Header
« Reply #4 on: July 09, 2018, 09:56:53 PM »
Dang Ed, I had one good one and one not so good but still intack from a 2dr and 4dr '34 Master sedans. Kept them for a couple years and ditched them when i went to all steel. They may have been different anyway from 33?

FATnLOW

  • Master Deluxe
  • *****
  • Posts: 829
  • Location: Ft.Smith Ar
Re: Wood Header
« Reply #5 on: July 09, 2018, 10:17:01 PM »
Steve....didn't want to hear that  LOL..but I know what you mean got clean up as you go...from what I understand 33and 34 are the same...messages fellow  in North Carolina said they might have one...but has condition issues at each end but if the main part ( center) is good for a pattern i could get my neighbor to cut it out..he's a wood worker so might work out if he locates it... He also said Classic Wood makes them as they supplied them with a pattern.....
« Last Edit: July 09, 2018, 10:20:01 PM by FATnLOW »

 


LINK SECTION - FEEL FREE TO SUGGEST ANY LINKS (YOURS INCLUDED).


OTHER FORUMS

CANADIAN RODDER FORUM
CHEVY 348/409 (W) Engine Forum
Classic Shop Talk
Inliners International
LAY IT LOW
METAL MEET FORUM
The H.A.M.B.
Vintage Chevrolet Club of America


CHEVY PARTS SOURCES

AMERICAN ANTIQUE AUTO PARTS
ALBANY COUNTY FASTENERS (SS NUTS/BOLTS etc)
1933-1935 Buy/Sell Chevy Parts
BOBS CLASSIC AUTO GLASS (& rubber seals) Ask for Forum Discount
BOWTIE REPRODUCTIONS
Chevs of the 40s Parts
Chevy Supply of Assonet
Classic Fabrication
Dropped Axles & Axle Reference Site
Early Chevrolet Parts
EMS Auto Parts
Exhaust Parts Including Oval Pipe
GLEN RARICK (LaFargeville, NY) Vintage Chevy Parts
Hamby Motors Vintage Parts SC
HEMMINGS MOTOR NEWS
HOTRODDERS.COM CLASSIFIED
I&I 1929-1954 Chevrolet Reproduction Parts
METRO Rubber Restoration Parts & Weather-Stripping
OBSOLETE CHEVY PARTS CO.
OLD CHEVY TRUCKS (Parts)
PERFORMANCE DYNAMICS SPEED SHOP (EFI & Misc AN Fittings)
REPAIR CONNECTOR STORE
Restoration Specialties & Supply, Inc
RESTORATION SUPPLY COMPANY
ROCKAUTO "Search retailmenot.com for discount codes"
ROCKY MOUNTAIN RELICS
Smooth steel running boards for classic cars and trucks
Rock Valley Antique & Street Rod Parts
Silver Spittoon Antiques
Steele Rubber Parts
STRAPWORKS.COM
Superior Glass Works
The Filling Station Vintage Chevy & GMC Parts
TAIL LIGHT KING
TRADERVAR Auto Gauges & Test Equip


TECH LINKS REFERENCE & MISC

1931 Chevrolet
1932 Chevrolet
BCC Bin Look Up
BCC Bin Look Up (#2)
Bergeson Universal Steering
CHEVROLET HISTORY 1916-1942
CHEVY MANIA
Chevrolet Production Figures
CHEVY TALK
Chevy Thunder (Great SBC Fuel Injection Reference Site)
CLASSIFIED SEARCH
CLIPS & FASTENERS
COMPNINE Total VIN Decoder
CRAIGSLIST SEARCH TEMPEST
DAVE's Small-Body HEIs
DeCode This VIN Decoder
ENGINE BUILDER MAGAZINE
Engine RPM Calculator
GearHead EFI Forums
HOT RODDER JOURNAL
LeBaron Bonney Company-Vintage Car Interior
McPherson 4 Year College Degree - Automotive Restoration
MILLER TIG Welding Calculator
NATIONAL DO NOT CALL REGISTRY
New England Chrome Plating
OBD2 ENGINE CODES
OLD CAR ADVERTISING CHEVROLET INDEX
OLD CHEVY PICTURES BY YEAR
PERFORMANCE DYNAMICS SPEED SHOP (EFI & Misc AN Fittings)
SEMA Action Network BREAKING NEWS
StoveBolt
TEAM 208 MOTORSPORTS Custom Wiring, Tuning, EFI
The12Volt - Free Vehicle Wiring, Relay Diagrams, and Technical Information
The Filling Station - Classic Chevrolet Tech Articles

Website Free Tracking
Stats Of Website
Flag Counter