Miscellaneous > Outdoors Area: Hunting, Fishing, Firearms, Camping, Hobbies, Videos etc
Another Hot Rod Stroller
TFoch:
A few years ago when my son and his wife had our first grandchild I built them a stroller. I started with a reproduction pedal car body and the first picture is what I came up with. Now that my daughter and her husband had our third grandchild, a little girl named Anna, I was asked to build a stroller for her. I started with a 30's style pedal car. First thing I did was remove all the pedal mechanism. Then I fabricated the lower bracket to mount the push handle.
TFoch:
Now that I had the bracket cut I plug welded the 3/4" square tubing into the 1" and welded the angle cut. This will be where the 1" aluminum square tubing will mount as the push handle. Then I painted it and mounted it to the bottom frame work of the pedal car.
TFoch:
Here it is with the push handle mounted. Next was to cut the lexan floor and mount it to the frame. After I cut it to size, I got to use a tool I bought to mount it. I bought a rivet nut tool and used it to mount the lexan floor to the frame.
FATnLOW:
Outstanding fabrication.... Good looking stroller
sammons:
Nice Tom, good work!
Nice tool, I almost bought one a few years ago before I closed up shop.
Navigation
[0] Message Index
[#] Next page
Go to full version