Rusty Bowtie

General Category => General Discussion - Intros => Topic started by: 32chevy vett on January 24, 2014, 10:05:15 PM

Title: Boards for your electronics
Post by: 32chevy vett on January 24, 2014, 10:05:15 PM

I bought these cutting boards to mount my electronics on. They are 1/4"thick you can drill and tap them. To hold every thing. With out fear of
grounding any thing.

Title: Re: Boards for your electronics
Post by: EDNY on January 24, 2014, 10:20:55 PM

That's a great idea...

Looks like you are running TBI?   Where did you locate those directional flasher mounts?

Title: Re: Boards for your electronics
Post by: TFoch on January 24, 2014, 10:25:06 PM

Some great ideas are so simple and this is one of them.  Great job Don and thanks for posting.

Title: Re: Boards for your electronics
Post by: 62131 on January 25, 2014, 08:18:24 AM

I used a piece of 1/4 plexiglass to mount my relay and remote receiver on mounted in trunk behind panel.
Keeps everything insulated. 

Title: Re: Boards for your electronics
Post by: 32chevy vett on January 25, 2014, 10:29:18 PM

I have T.P.I.. And the mounts came with the wiring harnesses. Plexiglass when you drill and tap, it can crack. These cutting boards you can hit with a hammer and not hurt them.

Title: Re: Boards for your electronics
Post by: 62131 on January 26, 2014, 08:09:38 AM

That is a uhmw material, I drilled clearance holes a bolted thing on, will post some pictures of my control panel I used in my 38. 

Title: Re: Boards for your electronics
Post by: cocobolo on February 27, 2014, 12:34:30 PM

Terrific idea...wonder if the missus will miss one of hers?  :)