Rusty Bowtie

General Category => General Discussion - Intros => Topic started by: FATnLOW on July 09, 2018, 04:30:17 PM

Title: Wood Header
Post by: FATnLOW on July 09, 2018, 04:30:17 PM
Any one have the wood header above the windshield for a '33-34 or know where I can get one?needing one ..or a part of one , for a sample to make one
Title: Re: Wood Header
Post by: madmike3434 on July 09, 2018, 09:22:12 PM
I take it that your looking for one from a master series, as the standard would be different.

Problem with wood repo guys is that they are so busy they are behind by a year, so trying to borrow one really is the best tact to take.  Unfortunately I cannot help you myself.

Up there where you say wood header.......I think there are two.
#1 is part of the roof system and is joined to the other 3 parts surrounding the roof opening.
#2 is the part that goes across just above the windshield area.  This is flat and easily reproduced.

I will search my pictures and see if I have anything to post as a reference.

mike lynch
Title: Re: Wood Header
Post by: FATnLOW on July 09, 2018, 09:33:17 PM
post some photos if you locate some.....Yes the one above the windshield i understand  consists of 3 pieces  1 long and the curved piece at the ends..... I got a response  that Classic Wood Products makes this piece...I  will call classic wood products  in the morning..
Title: Re: Wood Header
Post by: madmike3434 on July 09, 2018, 09:37:14 PM
I found these 2 in my pictures files, it might be your car ?

Think the 33 belongs to JOE wood guy in Toronto area

pictures are of a 33 master 4 door

Be aware with the various wood guys, IF THEY DO NOT HAVE IT IN STOCK, back away ,  otherwise your going to be running around in a circle waiting to get it.
mike
Title: Re: Wood Header
Post by: sammons on July 09, 2018, 09:56:53 PM
Dang Ed, I had one good one and one not so good but still intack from a 2dr and 4dr '34 Master sedans. Kept them for a couple years and ditched them when i went to all steel. They may have been different anyway from 33?
Title: Re: Wood Header
Post by: FATnLOW on July 09, 2018, 10:17:01 PM
Steve....didn't want to hear that  LOL..but I know what you mean got clean up as you go...from what I understand 33and 34 are the same...messages fellow  in North Carolina said they might have one...but has condition issues at each end but if the main part ( center) is good for a pattern i could get my neighbor to cut it out..he's a wood worker so might work out if he locates it... He also said Classic Wood makes them as they supplied them with a pattern.....