Rusty Bowtie

General Category => Moose's Tech Corner => Topic started by: themoose on January 04, 2013, 09:16:58 PM

Title: Molded coolant hose selection by both dimensional and visual description
Post by: themoose on January 04, 2013, 09:16:58 PM

Did you ever have to go to the parts store and spend a hole lot of time looking at their inventory of hoses trying  to find a molded hose with the correct diameter and bends to go from point A to point B. Take a look at the attached 3 files from Gates.The first page is a listing of hoses by dimension and page 2 and 3 show both dimensions and pictures of the shape of the hose. You can usually get a pretty good idea of what might fit by looking at the pictures and narrow down the ones that would most likely fit....It can really save a lot of time and aggravation. The files are large so I had to break them down into attachments but they are in order.

Title: Re: Molded coolant hose selection by both dimensional and visual description
Post by: themoose on January 04, 2013, 09:19:39 PM

Page 2

Title: Re: Molded coolant hose selection by both dimensional and visual description
Post by: themoose on January 04, 2013, 09:22:05 PM

Page 3

Title: Re: Molded coolant hose selection by both dimensional and visual description
Post by: EDNY on January 04, 2013, 09:58:54 PM

Another handy Tech TIp that I could used last year!  Thanks

BTW:  Just added a couple more car parts links below....

Ed

Title: Re: Molded coolant hose selection by both dimensional and visual description
Post by: TFoch on January 05, 2013, 09:05:48 AM

Great info Moose.  Thanks for posting.