[vette59jdwl]

Chemong55.  Last summer the wife and i were on tour  we did wisonsin michigan north dakota Montana and then back into North Dakota just because we wanted to do a tour of southern Saskatchewan then crossed over into Albert a Place calld Prevost Albert just south of town was a fellow that had grain barns converted to parts storage bins He had tons of stuff and i do mean tons lots of odd stuff no whole cars  he sold all of them to some museum.When i say he had grain sheds i do not mean one or two i thing total was 14  and on the doors outside were marked studebaker ,chev ,plymouth,essex ,dodge,marmon and so on.I will look see if i can find his name.I knew ruffly where he was and i pulled into this small town I spotted a taxi cab at the fuel pumps I stopped and asked him and he told me exactly where the guy lived and where the barns/sheds were  the older fellow was 93 and still got around  ,so the pieces are still out ther its just how to find them  vette59jdwl

[munch]

Bummer, I just got my new windshield in from Sanders Reproduction and it is the wrong size.  Suppose to be 14 x 42, I got 3/4 to 1 1/4 less.

[Chemong55]

munch   Hope mine is cut okay bought all the glass 3 years ago still in packing crate looked okay.As for the windshield issue I have decided to go with a fixed windshield.When I priced all the parts I need less the top channel which I don't have and it comes to around $1000us or $1500ca,just too much in my mind for a crank up windshield.Do you know by chance what goes on or in the 5 holes across the top of the dash.Thanks

[munch]

munch   Hope mine is cut okay bought all the glass 3 years ago still in packing crate looked okay.As for the windshield issue I have decided to go with a fixed windshield.When I priced all the parts I need less the top channel which I don't have and it comes to around $1000us or $1500ca,just too much in my mind for a crank up windshield.Do you know by chance what goes on or in the 5 holes across the top of the dash.Thanks

No sir I don't, right now I have brass screws and decorative washes in all the holes.

I got a local glass guy coming by tomorrow to make a template, we will see how it goes...

I am doing so because Sanders is telling me the advertised size is just an approximant and if I send it back and it is right for their template they will charge me the shipping.

[munch]

munch   Hope mine is cut okay bought all the glass 3 years ago still in packing crate looked okay.As for the windshield issue I have decided to go with a fixed windshield.When I priced all the parts I need less the top channel which I don't have and it comes to around $1000us or $1500ca,just too much in my mind for a crank up windshield.Do you know by chance what goes on or in the 5 holes across the top of the dash.Thanks

Chemong,

Do you know what size the windshield id you ordered?

[Chemong55]

No I don't got the glass from Chris Blattie on the HAMB phoned him and told him I had 30 2 door coach and he said he had the patterns no problem to supply,they were packed real well so just opened the crate to have a peek, tint right on edges finished real nice screwed the crate back together and has sat since then.He is on the Hamb o dex maybe try this   cblattie@aol.com   and he should give you his windshield measurements,nice guy to talk to.

[Chemong55]

Just measured mine 41 3/4 by 14

[munch]

Just measured mine 41 3/4 by 14

Thank you sir...

[ghost28]

Do you know by chance what goes on or in the 5 holes across the top of the dash.Thanks

 There should be a wood piece under the dash with 5 brackets screwed to it. The dash should have 5 machine screws that will thread to theses brackets through the holes.

[Chemong55]

Do you know by chance what goes on or in the 5 holes across the top of the dash.Thanks

 There should be a wood piece under the dash with 5 brackets screwed to it. The dash should have 5 machine screws that will thread to theses brackets through the hole


Any chance someone can post a picture.Thanks