Rusty Bowtie
Classified - PARTS For Sale - Wanted => 1930's Chevy/GM PARTS Wanted/For Sale => Topic started by: logride on November 17, 2013, 11:46:05 AM
-
Any one have any? They are the bars that go from the grill shell to the headlight base.
-
Still looking.
-
For what it's worth there's one side being offered on eBay now...
http://www.ebay.com/itm/1932-chevrolet-headlight-support/121220624910?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D3026419479592021567%26pid%3D100011%26prg%3D1005%26rk%3D1%26rkt%3D5%26sd%3D111171498897%26 (http://www.ebay.com/itm/1932-chevrolet-headlight-support/121220624910?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D3026419479592021567%26pid%3D100011%26prg%3D1005%26rk%3D1%26rkt%3D5%26sd%3D111171498897%26)
-
And the Filling Station has them for $275 P/N RW-495
-
Hey thanks guys. I think the one on eBay is only one side.
I have been looking at stainless stock and may make my own set. No they won't be original looking but they should be able to be polished. I'm thinking ill make the headlight bars as well. Not sure if I should use tube or bar stock yet. But it will certainly cost less than a trip to the platers.
If I do I'll post pictures
-
logride
I don't know if these are the correct parts or not but Bow Tie Reproductions lists
#172 - 32 Stabilizer Bars - Stainless Steelgo all the way to the bottom of the page on the link below and you should see them. Might be worth a call
http://www.bowtiereproductions.com/cowlLightsHeadlights.html (http://www.bowtiereproductions.com/cowlLightsHeadlights.html)
Moose