[TFoch]

Some of the flooding in our area----10 inches  and still raining

Ed,
Sorry to hear, stay safe and on high ground!
Tom

[FATnLOW]

Been cold here. managed to get cup holders in console.....suppose to warm up next week

[sammons]

Looks good Ed! Did you say you got those cup inserts from Speedway?  I couldn't find them in my cataloge.

Hope your flooding has gone down. Mom said they got right around 10" just N.E. of Branson, they are up high too. That snow storm totally missed here and you got the rain instead.

[TFoch]

Nice!  Nothing like a cool beverage when you're cruisin' (non-alcoholic of course)!

[ghost28]

I like those. I was just thinking if I would use something like that, and the answer was a resounding YES

[FATnLOW]

Steve.. I purchased the small one due to the room I was working with but here is the link off of the net

http://www.speedwaymotors.com/Search?query=drink+holders

Ended up with 11.8 inches of rain..the Lake is still 33 feet above normal they are releasing a small amount of water,in an effort as not to cause any more strain on the current flood situation down stream of the Dam.  Good thing i'm at least 110 feet above where the current water level is at now

[vette59jdwl]

Holly Crap Bat Man at those prices  i think i would be looking at cup holders for a boat  and they would be plastic if they screwed up you just though them out and replace  3 to 5 bucks
 vette59jdwl

[sammons]

Thanks for the link! Now if i can find a place to install them.
Man...i'm tight, but i'll pay the $12 and not have to replace it later.

[FATnLOW]

 Swiss Cheese......Next on the list is to repair drivers fender..have a 34 fender that I will cut up and use for the repair

[TFoch]

I use four front fenders to make two on mine.  The two I cut up had the side mount wells.  I have some pieces left if you need any.
Tom

[FATnLOW]

Tom...if you have the bead piece over the front tire on the  passenger  side I could use that... it would save me a headache on that fender..let me know what you have... photos of passenger fender  would help ..Thanks

[TFoch]

It's very solid but pretty banged up.  Might work for you if you're good with a hammer and dolly.  It's yours if you want it.  Let me know.
Tom

[FATnLOW]

Tom..    Bead  seems to look on yours, ok  mine is  crinkled about  6 inches both ways from the side  fender mounting holes...  is this fender complete  ??  I believe I can use yours to repair mine...need to work out shipping on it and  I am in no hurry to get it  as I have a ton of stuff to keep me busy.  how large of a box and weight do you estimate on the fender,,,Thanks

[TFoch]

I'll get it out in the garage and get a pic of the whole fender tomorrow.  With the pieces I used I may be able to cut it up and fit it in a smaller box than you think.  Hope it helps.
Tom

[FATnLOW]

Tom.. Thanks a bunch.... ED