General Category > GM Tech Questions and Answers

700R4 Wiring

(1/2) > >>

TFoch:
Jef,
I'm wiring my 33 and I have a 700R4 installed.  The transmission is stock and is serial number 7YNM148C out of an 87 Caprice Police car.  I want to have a switch so I can stop the converter from locking up while driving in town.  I also want it to unlock when I apply the brakes.  I sketched this schematic and wanted to know if it is correct.  Can you take a look and let me know?
Thanks,
Tom

Cool53:
Hey Tom,
That's perfect. If you want you can just ground the TCC solenoid inside the trans instead of outside. If you want it to come on just in 4th you can use a pressure switch in the 4th gear tap and do it that way. I have pictures I can send on if you want to see where it goes. Jef

TFoch:
Thanks Jef.  I'll probably leave it like it is for now but setting it up so it only locks up in fourth would be good information.
Tom

Cool53:
When I get back from FL next week I'll send some pics.

TFoch:
No hurry, enjoy the warmer temps in Florida.
Tom

Navigation

[0] Message Index

[#] Next page