Rusty Bowtie
General Category => Early Chevy/GM Discussion => Topic started by: FATnLOW on October 11, 2018, 08:37:50 AM
-
Any one running power rack and pinion??? if so what is your setup?
-
Mine is not power steering. The set up I have is a TCI front end with a rack behind the crossmember, a Dodge Omni one I believe.
-
Like Tom I'm using a Dodge Omni rack behind the front member but mine is a power rack with a Delco pump. The front suspension is Kugel.
-
my 35 coupe has a kugel with Omni rack, NO power assist. Not needed even with 60 series tires.
My 35 phaeton has a cricket rack about 5 turns lock to lock on JAG XKE ifs, way to slow. Have another OMNI rack going to swap in place.
Unless you have a really heavy car the Omni rack is sufficient.
mike
-
Searching for all parts to convert to power rack...wanting to get the smallest power steering pump,found one that you can order 1200 psi or 850 psi....had a question on required or acceptable pressure on the Omni power rack...would the 850 psi pump be compatible with the Omni rack...rather than using the pressure proportional valve????