Rusty Bowtie
General Category => General Discussion - Intros => Topic started by: 32chevy vett on January 24, 2014, 10:05:15 PM
-
I bought these cutting boards to mount my electronics on. They are 1/4"thick you can drill and tap them. To hold every thing. With out fear of
grounding any thing.
-
That's a great idea...
Looks like you are running TBI? Where did you locate those directional flasher mounts?
-
Some great ideas are so simple and this is one of them. Great job Don and thanks for posting.
-
I used a piece of 1/4 plexiglass to mount my relay and remote receiver on mounted in trunk behind panel.
Keeps everything insulated.
-
I have T.P.I.. And the mounts came with the wiring harnesses. Plexiglass when you drill and tap, it can crack. These cutting boards you can hit with a hammer and not hurt them.
-
That is a uhmw material, I drilled clearance holes a bolted thing on, will post some pictures of my control panel I used in my 38.
-
Terrific idea...wonder if the missus will miss one of hers? :)