Rusty Bowtie
Classified - PARTS For Sale - Wanted => 1930's Chevy/GM PARTS Wanted/For Sale => Topic started by: vette59jdwl on July 07, 2016, 11:00:00 PM
-
I am looking for a 1932 chevrolet rumble seat lid or a trunk lide with or without the handle if i can not find one by July 8th would some kind person out there in cyber space send me the measurments of one including the side bend pieces so i can have one made also please if you can the curvature of the lid as well.I think i can go by the wood under the piece where the rumble seat lid closes on,I have that but i am missing the lid and the piece that goes below the lid with the indent in it for the gas filler cap thanks vette59jdwl or lave@cogeco.ca or 1 613 548 4704
-
There's one listed on EBay
-
Keep in mind that the roadster ??? you have, the body is not made by fisher body but by an outside source it believe was Hercules Campbell. It is different than a coupe or a cabriolet.
in 1932 most roadsters were rumble seat equipped, but a small amount were produced with a trunk instead.
mike lynch
-
Mike I have changed my mind I am thinking of making my own I have the metal i don't have an english Wheel I have taken the piece apart that sites in front of the rumble seat and behind the convertible tope boot for the curvature of the wood that holds the latch that should be the curve of the trunk lid Rumble seat let at my age i don't think that any use is going to come from a Rumble Seat so i am tending to think Trunk lid with maybe 1949 shoebox trunk lid hinges.Dont forget this is a restomod of sorts.I had a great friend in New Mexico donate a hood that was in much better shape than the rusted hunk that i had. By the way do you still have the back window I believe it was out of a jaguire or something like that vette59jdwl
-
just stumbled into this................yes I still have the jaguar ?? roadster/cabriolet rear window.
mike lynch