Rusty Bowtie
Miscellaneous => Members Builds - Stocker -Streetrod - Ratrod - LowRider => Topic started by: 75TH RANGER INF on November 16, 2015, 10:56:15 PM
-
I got this drink holder that you can flush mount. I fabricated a bracket with slots to mount it to that I could attach to the square tubing behind the dash. I slotted it to allow for adjustment so it would mount flush with the lower dash panel.
I mounted the assembly then measured and cut my lower panels. Then I covered them in leather and you will see in the pics how the idea works
If you have a large drink in it the passenger a/c vent gets blocked some what but I have console vents to make up for it. Besides, the a/c blows so strong, you probably would not notice it that much anyway.
-
been thinking I need a drink holder in my 35 roadster with 34 master dash. You got lots of great pics to save.
mike 8)
-
I'm glad the pics could be of some use. That's what its all about is helping keep this era alive and helping the other guy.
Take Care
Duke
-
Duke you're drink holder fits nicely there,