62131.....Which cowl unit did you go with?? and does it operate ok?? pics if you have them...
Vette,, are you trying to remove the pins from the hood panels? Mine were really tight..what I did was sprayed with them down with a penetrate( WD 40 or what ever you use) and let the set for 1-2 hrs... then took my propane torch and heated the pins and pin clamps then let it set over night ....then repeated this process again..and then took a drift rod( same size as the pin rod) and hammered the pin out until I was able to get vice grips on the pin... then hammered the vice grips and sprayed the pin as it was moving...this worked for me
Stats Of Website