62131, I put a couple inches in a plastic Folgers coffee can and drop all my nuts and bolts in, then use a paint strainer to pour into another smaller container to retrieve. On the larger parts I just use a paint brush to coat and Carefully use an old tooth brush. Just takes 5-10 mins per soak. On body panels I put it in a weed sprayer and just respray every 10 mins and it,( for the most part) just runs off. Acationaly on really bad panels I use a scotch brite (which melts away) or 0-steel wool to scrub with. Then I just mix up some baking soda and water with ascotch brite to neutralize, then hose of with water. Dry quick, flash rust comes fast! Stay up wind for sure and don't breeth! It will lock you up.lolHere is what i'm currently using. Pool PH balance/ concrete etcher, under $4.00 per gal.
Stats Of Website