Rusty Bowtie

General Category => General Discussion - Intros => Topic started by: RoarsRods on November 12, 2020, 01:28:22 PM

Title: Possibly a new Chevrolet parts source!
Post by: RoarsRods on November 12, 2020, 01:28:22 PM

Hey Ed not sure if you have this link posted for Chevrolet parts? Here’s the link:

https://www.vintagepartsclub.com

RoarsRods

Title: Re: Possibly a new Chevrolet parts source!
Post by: TFoch on November 12, 2020, 02:28:44 PM

Lots of parts at reasonable prices.  Good site.

Title: Re: Possibly a new Chevrolet parts source!
Post by: EDNY on November 12, 2020, 04:14:37 PM

I'll link it up tonight Thanks!

Title: Re: Possibly a new Chevrolet parts source!
Post by: TFoch on November 12, 2020, 05:21:06 PM

I was surprised at the amount of sheet metal panels and parts were on there.

Title: Re: Possibly a new Chevrolet parts source!
Post by: EDNY on November 12, 2020, 10:35:40 PM

Thanks Guys..link is the last one in the "parts source" category below.

BTW: Anyone finding any of the links below that don't work...let me know.  Some of the links may not be valid any longer.

Thanks
Ed

Title: Re: Possibly a new Chevrolet parts source!
Post by: chopper526 on November 13, 2020, 02:09:06 PM

I am considering putting a vinyl top/insert on my '32. Juliano's keeps popping up in my search. Anyone ever use them? They may be worth adding to the list of sources.
https://www.julianos.com/

Title: Re: Possibly a new Chevrolet parts source!
Post by: EDNY on November 13, 2020, 06:22:28 PM

Quote from: chopper526 on November 13, 2020, 02:09:06 PM

I am considering putting a vinyl top/insert on my '32. Juliano's keeps popping up in my search. Anyone ever use them? They may be worth adding to the list of sources.
https://www.julianos.com/

Link is noted below..............Thanks

Title: Re: Possibly a new Chevrolet parts source!
Post by: TFoch on November 13, 2020, 06:57:03 PM

I used Juliano's for my seat belts.  Good vendor.

Title: Re: Possibly a new Chevrolet parts source!
Post by: 62131 on November 15, 2020, 10:23:30 AM

I've looked at that top kit they have, looks simple enough to install