Author Topic: 1935 chevy starter  (Read 7966 times)

David Galvin

  • Rookie
  • *
  • Posts: 28
1935 chevy starter
« on: December 17, 2013, 02:43:00 PM »
When I use the floor started button it takes 2-3 times before the starter ingages into the flywheel it will free spin. Do I need a new starter or is this fixable.
Thanks
Dave

themoose

  • Bowtie Moderator
  • Master Deluxe
  • *****
  • Posts: 1410
  • Location: Connecticut
Re: 1935 chevy starter
« Reply #1 on: December 17, 2013, 07:42:07 PM »
David

If I had to guess I would say that the first thing you should check your starter drive.It sounds like the starter motor is working properly if you can hear it spinning which means that the drive gear is not being thrust into the flywheel. You might want to try taking the starter out and making sure that there isn't something causing the drive to hang on the starter shaft. I have seen cases where something as simple and old and hardened grease on the shaft will cause the drive to stick. If you don't see any obvious  broken or worn parts such as the teeth on the drive and flywheel try cleaning everything up and re-lube it and see what happens. If all else fails replace the drive assembly. They are still readily available.

Moose

Too soon we get old too late we get smart. One out of two ain’t bad 8)

32chevy

  • Rookie
  • *
  • Posts: 24
  • Location: connecticut
Re: 1935 chevy starter
« Reply #2 on: December 17, 2013, 08:28:29 PM »
Sounds to be like your solenoid might be the issue. I have a place near me that rebuilds starters. Search around

themoose

  • Bowtie Moderator
  • Master Deluxe
  • *****
  • Posts: 1410
  • Location: Connecticut
Re: 1935 chevy starter
« Reply #3 on: December 17, 2013, 08:49:19 PM »

Hey 32chevy

If it's a stock 35 Chevy starter then there is no solenoid and David seems to be saying that the starter spins but doesn't engage the flywheel so with all things considered I felt that the drive might be the most likely culprit.

Moose
Too soon we get old too late we get smart. One out of two ain’t bad 8)

David Galvin

  • Rookie
  • *
  • Posts: 28
Re: 1935 chevy starter
« Reply #4 on: December 18, 2013, 07:50:26 PM »
OK, i will try cleaning it up. If that dosent work where should I buy the drive assembly.
Thanks
Dave

chopper526

  • Master Deluxe
  • *****
  • Posts: 2271
  • Age: 65
  • Location: Philly
Re: 1935 chevy starter
« Reply #5 on: December 19, 2013, 11:38:44 AM »
Just my two cents, but I am with Moose, I would suspect the starter drive too. You might try The Filling Station for a new starter drive.
Tighten it up til it strips, then back it off a quarter turn

EDNY

  • Bowtie Admin
  • Master Deluxe
  • *****
  • Posts: 3410
  • Age: 73
  • Location: Champlain, NY
33 Chevy 5 Window, 34 Chevy 3 Window, 37 Chevy 4dr sedan

David Galvin

  • Rookie
  • *
  • Posts: 28
Re: 1935 chevy starter
« Reply #7 on: December 20, 2013, 10:38:07 AM »
Thanks! EDNY I placed an offer on the drive, be nice to have even if cleaning fixes the problem.
Dave

David Galvin

  • Rookie
  • *
  • Posts: 28
Re: 1935 chevy starter
« Reply #8 on: January 03, 2014, 10:47:57 AM »
I bought the new drive, but I also cleaned and lightly lubed the old one and it works great. Thanks guys.

 


LINK SECTION - FEEL FREE TO SUGGEST ANY LINKS (YOURS INCLUDED).


OTHER FORUMS

AMERICAN DREAM CARS
CANADIAN RODDER FORUM
CHEVY 348/409 (W) Engine Forum
Classic Shop Talk
Inliners International
Killbillet Rat Rod Forum
LAY IT LOW
METAL MEET FORUM
The H.A.M.B.
Vintage Chevrolet Club of America


CHEVY PARTS SOURCES

AMERICAN ANTIQUE AUTO PARTS
ALBANY COUNTY FASTENERS (SS NUTS/BOLTS etc)
AN PLUMBING FITTINGS/ADAPTERS ETC
1933-1935 Buy/Sell Chevy Parts
BOB’S CLASSIC AUTO GLASS (& rubber seals) Ask for Forum Discount
BOWTIE REPRODUCTIONS
Chevs of the 40’s Parts
Chevy Supply of Assonet
Classic Fabrication
Dropped Axles & Axle Reference Site
Early Chevrolet Parts
EMS Auto Parts
Exhaust Parts – Including Oval Pipe
GLEN RARICK (LaFargeville, NY) Vintage Chevy Parts
Hamby Motors – Vintage Parts SC
HEMMINGS MOTOR NEWS
HOTRODDERS.COM CLASSIFIED
I&I 1929-1954 Chevrolet Reproduction Parts
JULIANO’S HOT ROD PARTS
McNichols PERFORATED METAL SUPPLIER
METRO Rubber Restoration Parts & Weather-Stripping
OBSOLETE CHEVY PARTS CO.
OLD CHEVY TRUCKS (Parts)
PERFORMANCE DYNAMICS SPEED SHOP (EFI & Misc AN Fittings)
REPAIR CONNECTOR STORE
Restoration Specialties & Supply, Inc
RESTORATION SUPPLY COMPANY
ROCKAUTO "Search retailmenot.com for discount codes"
ROCKY MOUNTAIN RELICS
Smooth steel running boards for classic cars and trucks
Rock Valley Antique & Street Rod Parts
Silver Spittoon Antiques
Steele Rubber Parts
STRAPWORKS.COM
Superior Glass Works
SURPLUS CENTER misc electrical, hydraulics etc
The Filling Station – Vintage Chevy & GMC Parts
TAIL LIGHT KING
TRADERVAR Auto Gauges & Test Equip
VINTAGE PARTS CLUB


TECH LINKS – REFERENCE & MISC

1931 Chevrolet
1932 Chevrolet
BCC Bin Look Up
BCC Bin Look Up (#2)
Bergeson Universal Steering
CHEVROLET HISTORY 1916-1942
CHEVY MANIA
CHEVROLET Model Identification Charts
Chevrolet Production Figures
CHEVY TALK
Chevy Thunder (Great SBC Fuel Injection Reference Site)
CLASSIFIED SEARCH
CLIPS & FASTENERS
COMPNINE Total VIN Decoder
CRAIGSLIST SEARCH TEMPEST
DAVE's Small-Body HEI’s
DeCode This VIN Decoder FREE ONE
ENGINE BUILDER MAGAZINE
Engine RPM Calculator
GearHead EFI Forums
GM Gen III+ Engine Crank Spacing & Interchange
GM TH-200-R4 Transmission
HOT RODDER JOURNAL
LeBaron Bonney Company-Vintage Car Interior
McPherson 4 Year College Degree - Automotive Restoration
MILLER TIG Welding Calculator
NATIONAL DO NOT CALL REGISTRY
New England Chrome Plating
OBD2 ENGINE CODES
OLD CAR ADVERTISING – CHEVROLET INDEX
OLD CHEVY PICTURES BY YEAR
PERFORMANCE DYNAMICS SPEED SHOP (EFI & Misc AN Fittings)
SEMA Action Network BREAKING NEWS
SMALL BLOCK CHEVY ENGINE SUFFIX CODES
StoveBolt
TEAM 208 MOTORSPORTS Custom Wiring, Tuning, EFI
The12Volt - Free Vehicle Wiring, Relay Diagrams, and Technical Information
The Filling Station - Classic Chevrolet Tech Articles

Website Free Tracking
Stats Of Website
Flag Counter
SimplePortal 2.3.7 © 2008-2024, SimplePortal